YMMV

* your mileage may vary

Saturday, 16 January 2016

Setting up USB Audio for MPC under Jessie

Setting up usb audio under MPC

pi@raspberrypi:~ $ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
snd-usb-audio



pi@raspberrypi:~ $ sudo cat /lib/modprobe.d/aliases.conf
# These are the standard aliases and dependencies.
# This file does not need to be modified.

# prevent unusual drivers from appearing as the first sound device ###########
options snd-pcsp index=-2
options snd-usb-audio index=0
options cx88_alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio nrpacks=1

# work around other kernel issues ############################################
# The EHCI driver should be loaded before the ones for low speed controllers
# or some devices may be confused when they are disconnected and reconnected.
softdep uhci-hcd pre: ehci-hcd
softdep ohci-hcd pre: ehci-hcd




1 comment:

  1. This is truly a great read for me. I have bookmarked it and I am looking forward to reading new articles. Keep up the good work!.
    USB名入れ

    ReplyDelete